fengdejixie's blog

High frequency screen/Screen-Fengde Machinery

High frequency screen【Fengde Machinery】

 

Description:

High frequency screen consists of vibrating exciter,ore pulp distributor,screen frame,machine frame,suspension springs and sieve etc.

This equipment with high efficiency,small amplitude and high screen frenquency is different from the conventional screening machine at many aspects.When working,the high-speed vibrating will breat the suiface tension of pulp,at the same time the fine granules are vibrating in a high speed,this will accelerate the separating usefull mines of large-density and increase the probability of the materials smaller than separation size to touch the sieve pore.Therefore it will produce a good separating condition to sieve the mines less than the cut size,especially with large-density materials and pulp to get through the sieve pore together.The core of function is the vibrating power and the excellent screen.

High Frequency Screen Features:

1.high efficiency

2.small amplitude

3.high frequency of screening;

High Frequency Screen Working Principle:

It differs from the conventional screens with breaking of the surface tension of slurry and small granularity's high speed vibration on sieve cover and accelerates the separating of large-density useful mines and increase the contacting probability of the materials smaller than output granularity and the sieve pore. Therefore produce good condition and make the materials smaller than the output granularity, especially the big-density materials and slurry get through the sieve pore together.

Specification

Model	Screen square(m2)	Thickness of input material(%)	Processing capacity(t/h)	Motor power(kw)
GPS-4	4.5	30%-40%	15-25	0.72
GPS-5	5.2	30%-40%	20-30	1.1
GPS-6	6	30%-40%	24-36	1.5
GPS-8	8.1	30%-40%	32-48	2.2

Technical parameters are subject to change without notice

Mobile phone:0086-13513898304
Email: equipmentland2008@gmail.com
Msn:equipmentland2008@hotmail.com
Yahoo:equipmentland2008@yahoo.com
Skype:equipmentland2008
Website:www.zcrusher.com   
    www.cementmill.cn

Hammer crusher/Crusher/Stone crusher/Crushing machine-Fengde Machinery

Hammer crusher【Fengde Machinery】

 

Hammer crusher's advantages:

1.Low hanging
2. Big swing angle
3. Long useful life
4.Easy maintenance

Hammer crusher's product feature

This series of hammer crushers is suitable for crushing various brittle materials such as coal, salt, chalk, plaster stone alum stone. Brick-tile limestone, etc., whose compressive resistance does not exceed 150Spa and the moisture content should not be greater than15%.

Hammer Crusher working principle:

The main wroking part of hammer crusher is rotos with hammer, the rorors consisf of main shaft, disk, pin shaft and hammers.The motor drives the motor drives the rotos to roate quickly in the crushing cavit. Raw naterials enter the crusher through the feedd opening and are stricken, impacted, cut and groun bu the high-speed hammer th small size. There is a screening palte under the rotor, so that materials with size smaller then the screen meh will be screened out and other are left to be further hammered and ground until reach the stand size. The size of the final product can be adjusted by changing the screenin plate. the gap between the rotors and the screening plate can also be adjusted according to different requirement.

Hammer crusher's technical parameters

Model	Rotor Working Wiameter Length(mm)	Speed of Rotor (r/min)	Size of Feed Opening(mm)	Max. Feed Size(mm)	Discharge Size (mm)	Capacity (t/h)	Motor Power (kw)	Weight (t)
PC-42	400/175	1000	150*260	50	3	0.5	5.5	0.5
PC-44	400/400	1500	220*450	100	10	5-8	7.5	0.9
PC-64	600/400	1000	295*450	100	15	10-12	18.5	1.03
PC-66	600/600	1000	250*570	100	10	12-18	45	2.14
PC-86	800/600	1000	350*570	200	10	20-25	55	2.45
PC-88	800/800	1000	350*770	200	15	35-45	55	3.05
PC108	1000/800	1000	580*850	200	13	25-40	110	6.5
PC-1010I	1000/1000	1000	580*1060	200	15	40-80	132	7.59
PC-1010||	1000/1000	1000	580*1060	200	10	30-50	160	7.59
PC-1010|||	1000/1000	1000	580*1060	100	<=5 80%	25-35	185	7.59
PC-1212	1250/1250	739	940*1430	200	20	100	180	19.1
PC-1414	1400/1400	740	860*1540	250	20	120-170	280	17.2
PC-1618	1600/1800	590	1260*1920	400	25	250-300	630	45

Mobile phone:0086-13513898304
Email: equipmentland2008@gmail.com
Msn:equipmentland2008@hotmail.com
Yahoo:equipmentland2008@yahoo.com
Skype:equipmentland2008
Website:www.zcrusher.com
        www.cementmill.cn

Roller crusher/Double roller crusher/crusher/stone crusher/crushing machine-Fengde Machinery

Roller crusher【Fengde Machinery】

 

The working principle of the double-roller crusher:

The regulation of outfeed particle size: There are wedge-shaped or gasket regulating device between the two rollers, the top of the wedge-shaped device has adjustment bolt, the wedge tip active roller away from the fixed wheel when the adjustment bolt pull the wedge upward .At this time ,the gap of the two roller become larger, particle size outfeed become larger. when the wedge is down, the gap of the active roller become smaller under the action of the compression spring, particle size become smaller .Gasket device adjust the size of the particle outfeed through increase or decrease the quantity or thickness of pads .The gap of two roller become smaller when increasing gasket, the gap of two roller become large when reducing gasket, the particle size outfeed become smaller.

Application of Fengde Double roll crusher

Double Roll Crusher is compression type crusher, which is widely used in the field of coal, beneficiation, metallurgy, coking chemical industry, building materials, and refractory materials.

Main advantage

1. It has a superior effect than common grinding machines in producing building materials such as pisolites and pea gravels.

2. adjustable output size

3. high reduction ratio, even granularity

Technical Parameter

Model	PG200*100	PG400*250	PG610*400	PG750*500
Roller Diameter( mm)	200	400	610	750
Roller Length( mm)	100	250	400	500
Roller Rotary Speed (r/min)	400	200	75	60
Charge Granularity( mm)	<10	<25	<70	<90
Discharge Granularity (mm)	0-4	0-8	0-30	0-50
Output( t/h)	4-8	6-10	15-30	30-50
Motor Power( kw)	1.5	5.5	15	22
Weight(kg)	150	1200	3500	5800

Mobile phone:0086-13513898304
Email: equipmentland2008@gmail.com
Msn:equipmentland2008@hotmail.com
Yahoo:equipmentland2008@yahoo.com
Skype:equipmentland2008
Website:www.zcrusher.com
    www.cementmill.cn

Shaving bed/Shaking bed/Table concentrator-Fengde Machinery

Shaving bed【Fengde Machinery】

 

Application:
  Shaving bed is a mine selecting machine for fine materials working by gravity. It is widely used in selection of Tin, tungsten, gold, silver, lead, zinc, tantalum, niobium, iron, manganese, ferrotitanium and coal

Mian technical parameters of Shaving bed

Item	LS<6-s>	Ys
Bed structure	Polyester glass steel ,embedded skeletons composite structure	Polyyester glass steel.embedded skeletons composite structure
Bed specification	150-1850*4500mm	150-1850*4500mm
Sorting area	7.5m2	7.5m2
Bed direction	The left-right	The left-right
Landscape angle(°)	0-5	0-5
Stroke	10-30mm	8-22mm
Times(times/min)	240-360	240-360
Size of material selected	Grit 2-0.5mm,fine sand 0.5-0.074mm,pulp 0.074mm	Grit 2-0.5mm,fine sand 0.5-0.074mm,pulp 0.074mm
Motor power	1.1kw	1.1kw

Mobile phone:0086-13513898304
Email: equipmentland2008@gmail.com
Msn:equipmentland2008@hotmail.com
Yahoo:equipmentland2008@yahoo.com
Skype:equipmentland2008
Website:www.zcrusher.com
    www.cementmill.cn

Belt conveyor/Strap conveyor/Conveyor/Conveyor belt-Fengde Machinery

Belt conveyor【Fengde Machinery】

 

Application of Belt Conveyor

This machine is a continuously conveying equipment for general purpose materials in bulk and adopted belt with waviness sides and diaphragm plate. It is specially using for big inclined angle conveying.

It is widely using for coal, chemical industry, building materials, metallurgy, electric power, light industry grain, port, shipping, etc. Specific gravity of bulk materials is 0.5-2.5 t/m³ can be conveyed in the working environment where the temperature is during -15 degree to 140 degree.

Conveying materials which have special requirement, such as high temperature, materials 

containing acid, alkali, oil substance or organic solvent should be conveyed using special 

conveyor belt. 

Features of  Belt Conveyor

Using big inclined angle conveyor to conveyor scattered materials can save a lot of floor spaces 

of equipment, and radically slove the conveying height general pattern belt conveyor can not reach.

Using machinery belt conveyor to conveyor materials can reduce total investment cost, save 

20% to 30% of investment cost, and there is better effect in building materials and coal carbon 

coal industry.

Compared with general conveyor, bucket elevator and enmasse conveyor, its comprehensive 

technology performances are more superior.

Big conveying capacity, it can reach 1000 cubic meters per hour and vertical lifting height can reach 150m.

When vertically conveying materials, the biggest materials granularity is 300 mm.

It can transit stably from level to incliation.
Low energy consumption, easy construction and convenient maintenance.
High adhesive tape strength and long life.
Partial Technical Parameter of  Belt Conveyor  

Belt width (mm)	Height of side way (mm)	Distance between baffles (mm)	Capacity Qv(m³/h)(mm)	Max materials size and belt speed(sec)	Power (Kw)	Angle of inclination(°)
500	80	126	11	1.0/50	15~18.5	90
		252	-
	100	126	16	1.0/55
		252	-
	120	126	24	1.0/60
		252	-
		378	-
650	100	126	23	1.25/55	1.5~22	90
		252	--
	120	126	34	1.25/60
		252	--
		378	--
	160	252	25	1.25/80
		378	-
800	120	126	46	1.25/60	2.2~45	90
		252	--
		378	--
	160	252	34	1.25/80
		378	-
	200	252	55	1.25/100
		378	36
		504	-
1000	160	252	45	1.25/80	4.0~75	90
		378	-
	200	252	75	1.25/100
		378	48
		504	-
	240	252	111	1.25/140
		378	73
		504	-

Mobile phone:0086-13513898304
Email: equipmentland2008@gmail.com
Msn:equipmentland2008@hotmail.com
Yahoo:equipmentland2008@yahoo.com
Skype:equipmentland2008
Website:www.zcrusher.com
    www.cementmill.cn

Sand making machine/Sand maker/Sand making equipment-Fengde Machinery

Sand making machine【Fengde Machinery】

 

Induction of sand making machine：

Sand making machine (namely PCL Vertical shaft impact crusher) is of high-power and low-consumption, which is designed depending on several years hard work and study of mechanical mining equipment. absorbed the advanced technology of the same products of Barmac Company of America, now is of the international level. plays an important role in crushing minerals into pieces. is widely used in all kinds of mineral, cement, corhart, bauxite chmotte, carborundum grain, glass raw material, machine made construction sand, stone stock and all kinds of metallurgy slag, especially carborundum, sintered bauxite, magnesite, and so on material with features of very hard and anticorrosion. And is more productive than other kind of crushers.

Working Principle:

Stone less than 50mm enters though conveyor belt. Stone is crushed by hitting other stones. Material falls down to impellor cavity. Under great centrifugal force, it hits material that coming downwards. After hitting each other, they force a vortex between impellor and shell, and hit each other several times, finally smaller stone comes out, and goes to vibrating screen. Satisfactory material is transported to sand washing machine, however overlarge material will go back to to be recrushed. Output sizes can be made according to customers requirement. If input size is larger than the designed size, other crushing equipment will be necessary.

Characteristics of sand making machine:

Simple structure and low operating cost; high efficiency and low consumption; has the function of fine crush and crude grinding; slightly influenced by the moisture content of material, and the max moisture content is 8%; more suitable for crushing mid-hardness and high-hardness materials; cubic shape of final products, high density of piling up and low iron pollution; more wearable and easy maintenance; low working noise and light dust pollution.

Technical Data:

Model	Rotate speed of impeller (r/min)	Max feed size (mm)	Power (Kw)	Weight (including motor) (t)	Output capacity (t/h)	Overall dimensions (mm)
PCL-600	2000-2600	30	2*30	5.6	10-20	2500*1600*2260
PCL-750	1600-2100	35	2*45	7.5	20-35	2780*1800*2700
PCL-900	1300-1700	40	2*55	12	25-50	3900*2160*2770
PCL-1050	1100-1450	45	2*110	16	40-70	4660*2450*3660
PCL-1250	950-1200	45	2*132	22	60-100	5600*2950*4000
PCL-1350	900-1200	50	2*160	26	80-120	5340*2940*3650

Notice: Any change of Sand Making Machine technical data shall not be advised additionally.

Mobile phone:0086-13513898304
Email: equipmentland2008@gmail.com
Msn:equipmentland2008@hotmail.com
Yahoo:equipmentland2008@yahoo.com
Skype:equipmentland2008
Website:www.zcrusher.com
    www.cementmill.cn

Vibrating feeder/Vibrating feeding machine/Feeder/Feeding machine-Fengde Machinery

Vibrating feeder【Fengde Machinery】

 

Vibrating feeder's features

GZDZSW series of the vibrating feeder are the advanced feeding equipment, with the property as follows comparing to other feeding machine.

a.Small body, light weight, strict structure.

b.Easy installation and maintenance, low cost operation.

c.High efficiency, big feeding capacity.

d.Little electric expedition ,high power efficiency.

Vibrating Feeder Operating Principle:

Vibrating feeder is composed of vibrating body, spring, spring chassis, vibrating motor, and screen bar, vibration exciter which is formed by two eccentric shafts (driving shaft and driven shaft) and gear wheels.

Through the motors driving force carried by the triangle wheel, the upper gears of the driving shaft joggle and propel the driven shaft. At this time, the two shafts rotate in reverse at the same time leading to the vibrating of the machines funnel. Under the funnels vibrating, the materials will continuously move forward and some smaller ones will directly fall down the belt conveyor while passing the screening bar (there are some fixed spaces between those bars). Finally, the materials can be transported to the aiming place.

Vibrating Feeder (Industrial Vibrator) Application

Vibrating Feeder is a kind of linear direction feeding equipment. It features smooth vibrating, reliable operation, long service life and being suitable for feeding. Vibrating feeders are widely used in mining, building-material, silicate andchemical industry in the crushing and screening plants.In the Sand-Stone production line, vibrating feeder can send materials to crusher
evenly and continuously and at the same time, it can screen materials roughly.Vibrating feeder can be used in these areas such as metallurgical industry, coal mining industry, mining-selecting, building, chemical and grinding industry, etc.
 Vibrating Feeder Specification:

Model	Max input size(mm)	capacity (t/h)	motor power (kw)	Installaition Slope	weight (kg)	Size of Funnel (mm)
GZD-180*80	300	30-80	2*1.5	0-10	0.8	1800*800
GZD-300*90	500	40-100	2*2.2	0-10	1.5	3000*900
ZSW-380*96	500	90-100	11	0°	3.98	3800*960
ZSW-490*96	500	120-240	15	0°	5.5	4900*960
ZSW-490*110	580	120-280	15	0°	5.72	4900*1100
ZSW-590*110	600	280-500	22	0°	6.13	5900*1100
ZSW-600*130	750	400-560	22	0°	7.8	6000*1300

Note: This specification is just for reference, any changes are subject to the products.

Mobile phone:0086-13513898304
Email: equipmentland2008@gmail.com
Msn:equipmentland2008@hotmail.com
Yahoo:equipmentland2008@yahoo.com
Skype:equipmentland2008
Website:www.zcrusher.com
    www.cementmill.cn

Circular Vibrating screen/Vibrating screen/Circle vibrating screen/Screen-Fengde Machinery

Circular vibrating screen【Fengde Machinery】

 

Detailed Product Description of Vibrating Screen:
Vibrating Screen is one of the unique product or equipment, it is used for separating the stuff. The circular vibrating screens work on circular motion. The vibrating screens are mainly used in coal dressing, metallurgy, mine, power station, water conservancy project, building industry, light industry and chemical industry etc They are efficient screening machines for the classification of bulk material such as coal, minerals, coke etc.

Vibrating Screen Features and Benefits:
(1)Simple and dependable Eccentric type system.
(2)High screening capacity.
(3)High durability.
(4)No transmission of screen panels.
(5)Ready changing of screen plates.
(6)Rigid and vibrating resistance screen body.

Work Principle of Vibrating screen:
Vibrating screens is compiled of mainframe, eccentric bock, screen web, rub spring, electric motor, coupler and some more. Vibrating Screen moves round. It has multi-layers and is of high efficiency. The eccentric shaft vibration exciter and partial block help to adjust amplitude. The material drops down along the long line.
We have always kept in our minds the choices, preferences and the tastes of our all clients. We will offer you suitable type according to your requirements.

Main technical parameters of Circular vibrating screen

Model	Sieve	Sieve area (㎡)	Mesh size (mm)	Max feeding size (mm)	Capacity (m3/h)	Vibrating power (r/min)	Double amplitude (mm)	Motor power (kw)	Sieve obliquity (°)	Sieve specification (mm)	Total weight (kg)	Dimenssions (L*H*W)(mm)
2YK1225	2	6	4-50	400	8-60	800-970	8	5.5	20	1200*2500	2500	3040*1840*800
3YK1225	3	9	4-50	400	10-70	800-970	8	5.5	20	1200*2500	2850	3040*1840*1200
2YK1230	2	7.2	4-50	400	12-78	800-970	8	7.5	20	1200*3000	3000	3390*1900*800
3YK1230	3	10.8	4-50	400	13-80	800-970	8	7.5	20	1200*3000	3600	3537*1900*1200
2YK1237	2	8.88	4-50	400	15-86	800-970	8	7.5	20	1200*3700	3600	4090*1900*800
3YK1237	3	13.22	4-50	400	16-90	800-970	8	7.5	20	1200*3700	4200	4400*1950*1200
2YK1535	2	10.5	5-50	400	20-125	800-970	8	11	20	1500*3500	4890	4552*2250*900
3YK1535	3	15.75	5-50	400	21-125	800-970	8	11	20	1500*3500	5700	4552*2250*1600
2YK1545	2	13.5	5-50	400	22-150	800-970	8	15	20	1500*4500	5330	5400*2250*1600
3YK1545	3	20.25	5-50	400	22-150	800-970	8	15	20	1500*4500	5800	5400*2250*1700
2YK1548	2	14.4	5-50	400	22.5-162	800-970	8	15	20	1500*4800	5980	5300*2200*860
3YK1548	3	21.6	5-50	400	22.5-162	800-970	8	15	20	1500*4800	6600	5752*2200*1600
2YK1848	2	17.28	5-80	400	25-206	750	11	15	20	1800*4800	7080	6140*2470*1380
3YK1848	3	25.92	5-80	400	32-276	800-970	8	18.5	20	1800*4800	7600	6140*2710*1780
2YK1854	2	19.44	5-80	400	32-312	800-970	8	18.5	20	1800*5400	8150	6500*2600*1300
3YK1854	3	29.16	5-80	400	32-312	800-970	8	22	20	1800*5400	8840	6960*2600*1630
2YK2160	2	25.2	5-100	400	50-475	970	8	30	20	2100*6000	9780	7300*2950*2000
3YK2160	3	37.8	5-100	400	50-475	970	8	30	20	2100*6000	10800	7300*2950*2000
2YK2460	2	28.8	5-100	400	65-550	970	8	37	20	2400*6000	13600	7450*3230*1500
3YK2460	3	43.2	5-100	400	70-620	970	8	37	20	2400*6000	15600	7450*3230*1910

Mobile phone:0086-13513898304
Email: equipmentland2008@gmail.com
Msn:equipmentland2008@hotmail.com
Yahoo:equipmentland2008@yahoo.com
Skype:equipmentland2008
Website:www.zcrusher.com
    www.cementmill.cn

Rotary dryer/Rotary drying machine/Dryer/Drying equipment-Fengde Machinery

Rotary dryer【Fengde Machinery】

 

Working Theory of Rotary Dryer:

The wet materials are transported into the material hopper by the belt conveyor and bucket elevator, and gets into the feeding terminal through feeding pipe with the aid of feeder of material hopper. The pitch of the feeding pipe should be more than the natural pitch of materials in order to help the materials flow into the dryer successfully. The cylinder of dryer is a rotary cylinder which is oblique slightly. The materials are fed from the relatively higher terminal, heat carrier comes in from the lower terminal, and sometimes the heat carrier and materials get into the cylinder together. Along with the revolving of cylinder, the materials move to the lower terminal due to the gravity. When the wet materials move forward, it receives the heat from the heat carrier directly or indirectly. As a result, the wet materials are dried, and discharged out by belt conveyor or screw conveyor on the outlet. There is shoveling plate inside the cylinder in order to shovel materials up and cast it out, to increase the connection surface, to promote drying efficiency, and accelerate the forward movement of materials. Generally, the heat carrier can be hot air and chimney flue. After the heat carrier is dried, the materials mingled with air should be collected with cyclone dust collector. If there is need to reduce the content of dust mixed with tail gas, the heat carrier should be subject to bag dust collector or wet dust collector before it is discharged.

Performance and Feature of Rotary Dryer:

The rotary dryer mainly consists of rotor, shed plate, transmission device, support device, seal ring, and other spare parts. The rotary dryer has the advantages of reasonable structure, excellent manufacture, high output, low energy consumption, convenient operation and so on. The rotary dryer is applicable for particle materials, and is also applicable for paste and viscous materials which are mingled with particle materials, or materials whose water content is high. It has the advantages of large production volume, wide application range, small flow resistance, large adjustable range, and convenient operation, etc.

Application

This machine can dry many kinds of materials which contain moisture, such as coal, coal slurry, slag, industrial waste, and clay stone. They are widely used in building materials, metallurgy, and chemical industry.

Specifications of Drier

Specific-ations(m)	Capacity(t/h)	Main motor		Main gear box		Weight(t)
		Power(kw)	Model	Model	Speed reduction ratio
ø1.2*10	2.5	7.5	Y160M-R3	ZL50-16-I	-----	13.5
ø1.5*12	3.3-4.9	10	Y160L-6-B3	JZQ500-III-2F	-----	18.9
ø1.5*15	4-6	18.5	Y200L1-6	JZQ500-III-2F	-----	21
ø1.8*12	4-6	18.5	Y160L-6	ZQ50-16II-2	16.46	22.83
ø2.2*12	7-12	18.5	Y200L7-6	JZQ650-III	31.5	37.6
ø2.2*14	7-12	22	Y200L7-6	JZQ650-III	31.5	40
ø2.2*16	12	30	Y225M-6	JZQ750-III	31.5	45
ø2.4*14	12	30	Y250M-6	JZQ750-III	31.5	51
ø2.4*18	10-13	37	Y250M-6	ZL85-13-I	27.16	54
ø2.4*20	10-14	37	Y250N-6	ZL85-13-I	27.16	54.14
ø3*20	25	55	Y250M-4	ZL100-16-I	41.52	78
ø3*25	32-36	75	YR280M-4	ZL100-16-I	41.52	104.9

Mobile phone:0086-13513898304
Email: equipmentland2008@gmail.com
Msn:equipmentland2008@hotmail.com
Yahoo:equipmentland2008@yahoo.com
Skype:equipmentland2008
Website:www.zcrusher.com
    www.cementmill.cn

Rotary kiln/Cement rotary kiln/kiln-Fengde Machinery

Rotary kiln【Fengde Machinery】

 

Rotary kiln is consist of cylinder, gears, support device, kiln liner , kiln tail sealing equipment, kiln head hood and combustion.

Cylinder as heating pivoting department,made of high-quality carbon steel plate,is supported on the support device by tyre,and there is machanical or hydraulic pressure catch wheel on the first or some gear in order to control the turning of cylinder.place of the tyre Gearing gyrate according to process-required rotating speed by ring gear in the middle of cylinder. Because of the need By the required of installation and maintenance, the bigger rotary kiln has auxiliary gears, which makes cylinder gyrate more slowly. To prevent cold air come in and dust overflow, the reliable sealing equipment of kiln tail and head is installed on feeding hole and discharge  hole.

Product application:

Rotary kiln is a Thermal Equipment which is used for  heating materials, like cement, copper Metallurgy, ferrous metallurgy, refractory material, chemical materials, paper making etc.

Product feature:

1. Support device: advanced shaft structure, has automatic temperature measurement and electrical heating device ,meanwhile you can choose liquidity support .

2. Catch wheel :  mechanical wheel and hydraulic pressure

3. Gearing:  single driver or double driver. Control the revolution by YZD, DC motor and frequency variable motor. Be reliable , energy-saving, and efficient.

4. Cylinder tyre bolster:  bolster has three types: fixed type ,adjustable type and floating type. The structure is simple ,maintenance and replacement are convenient without hurting the cylinder.

5. Sealing equipment: there are many different design of sealing style for choice according to kiln models, including air cylinder edge sealing, spring edge sealing , graphite block sealing and combination for above. The feather is adaptive for cylinder rotating and swing. And airproof performance is well.

Specifications of Rotary Kiln

Specificttions (mm)	Kiln demensions			Output(t/h)	Rotation speed(r/min)	Moto power(kw)	Weight	Note
	Diameter (mm)	Length (mm)	Obliquity (%)				(t)
ø1.4*33	1.4	33	3	0.9-1.3	0.39-3.96	18.5	47.5	----
ø1.6*36	1.6	36	4	1.2-1.9	0.26-2.63	22	52	----
ø1.8*45	1.8	45	4	1.9-2.4	0.16-1.62	30	78.2	----
ø1.9*39	1.9	39	4	1.65-3	0.29-2.93	30	77.59	----
ø2.0*40	2	40	3	2.5-4	0.23-2.26	37	119.1	----
ø2.2*45	2.2	45	3.5	3.4-5.4	0.21-2.44	45	128.3	----
ø2.5*40	2.5	40	3.5	9.0-10.5	0.44-2.44	55	149.61	----
ø2.5*50	2.5	50	3	6.25-7.4	0.62-1.86	55	187.37	----
ø2.5*54	2.5	54	3.5	6.9-8.5	0.48-1.45	55	196.29	----
ø2.7*42	2.7	42	3.5	10.0-11.0	0.10-1.52	55	198.5	----
ø2.8*44	2.8	44	3.5	12.5-13.5	0.437-2.18	55	201.58	Suspension preheating kiln
ø3.0*45	3	45	3.5	12.8-14.5	0.5-2.47	75	210.94	----
ø3.0*48	3	48	3.5	25.6-29.3	0.6-3.48	100	237	Outside disassemble kiln
ø3.0*60	3	60	3.5	12.3-14.1	0.3-2	100	310	----
ø3.2*50	3.2	50	4	40.5-42	0.6-3	125	278	Outside disassemble kiln

Mobile phone:0086-13513898304
Email: equipmentland2008@gmail.com
Msn:equipmentland2008@hotmail.com
Yahoo:equipmentland2008@yahoo.com
Skype:equipmentland2008
Website:www.zcrusher.com
    www.cementmill.cn